4.99

The Galaxy cube is the 6th cube in the impossible cube series. This cube is very tricky to solve.

Description

The Galaxy cube is the 6th cube in the impossible cube series. This cube is very tricky to solve.

Small warning… This cube is very difficult. None of my playtesters were able to assemble this cube (in the hard configuration) after disassembling it.

Just as with the 5th Impossible cube you can use a rotation move to solve this cube but you can also do it with linear movements. The cube is very challenging when using the rotation move, but it’s even more difficult when you don’t use any rotations!

This cube takes 31 steps to disassemble (11.12.2.4.2)

You will get the .stl files to 3D print this cube yourself. This cube can be printed without any support material. There are three different tolerances to print the cube: 0.25mm, 0.15mm and 0.05mm. There is also a burrtools file which you can use to make your own tolerances. If you print this cube it will be extra challenging because you start with the disassembled parts